Wing Foils

FUSION ALLOY MAST FOIL – Only Mast 40cm 70cm 90cm The Fusion Alloy mast is constructed from aircraft-grade extruded aluminum, resulting in an incredibly rigid and hydrodynamic structure. Helicoil inserts prevent salt water corrosion at the screw connection points. The mast integrates seamlessly into all 9cm industry standard foil boxes. Only the mast in the first picture is sold here. The other pictures are for illustration purposes only!!!

Glide Fuselage 4Carbon All Glide fuselages are made of aluminum. The Glide Fuselage 4 Carbon and the Glide Fuselage Alu have different connections and are NOT compatible with each other. All Glide and Swift front and back wings fit every fuselage.

Interchangeable Head -SP CNC machined aluminum adapter with double teeth and double titanium screws for an ultra-rigid connection to the mast. Designed for use with SUP/Surf/Wing boards with dual rails. Four easily accessible screw holes allow for easy connection to the board as the screws are already placed in the fin boxes.

Glide HP Back WingThe GLIDE HP Wings are made from pre-preg carbon layup with an inner foam construction for maximum durability to weight ratio. This configuration creates a natural lean for smooth cornering and helps maintain stability while driving.

Glide Mast Alu SIZES: 55 / 75 / 85 Aluminum poles must be used with an aluminum fuselage. Carbon masts must be used with a Fuselage 4 Carbon. All Glide HP and Glide Swift front and back wings fit every fuselage.

SONAR CF Carbon Foil Mast Our highest quality pre-preg carbon mast offers a stiffer, more direct feel and instant feedback. Tapered for optimal load transfer and reduced surface resistance, the refined one-piece design represents a strong, durable, and corrosion-free choice in all disciplines. The CF72 mast is ideal for flatter water and surf foiling. The longer CF85 mast enhances overall performance in choppy conditions. Equipped with GeoLock.

SONAR MA V2 PRIME Mid Aspect Front Wing Our larger MAv2 Series Wings offer a stable foil setup designed for wing and boat foiling. Easy to handle with stable pitch across the entire speed range, the MAv2 Prime prioritizes controllable early takeoff and a lower stall speed. The MAv2 Prime is made with an affordable pre-preg E-Glass construction and offers the same high performance, durability, and impact resistance as the carbon pre-preg construction.

SON OF Foil Mast Our refined Aluminium Foil (AF) profile offers the best balance between low weight and increased strength for higher loads. The AF72 mast is ideal for flatter water and surf foiling. The AF8 is the perfect beginner size for wing foiling. The AF85 performs in all disciplines and is more forgiving in rougher conditions. The AF85 and AF95 give you more height to cross waves or make tight turns. The 55cm AF mast is for extremely shallow waters. The Sonar mast features our unique GeoLock conical geometry locking system. Designed for strength and stiffness, GeoLock provides a more effective load-bearing connection between the mast and the fuselage that connects them, making them feel like one piece. Screws engage in the GeoLock, allowing load transfer across the entire cross-section of the mast profile and enabling more efficient load distribution and a secure connection that lasts. NOTE: The AF mast does not have an integrated foil board mounting plate. To mount it on your foil board, you will need the AF Board Adapter, which is available separately or included in all Sonar AF and Prime Editions.

SONAR-HM High Modulus Carbon Mast Incredibly thin. Impressively fast. We have reduced the thickness of the submerged part of our new high-modulus prepreg carbon masts by over 15% compared to our standard carbon masts, while simultaneously increasing both bending and torsional stiffness. The HM80 is preferred for disciplines without wind power – surf foiling, pumping, and downwind. The shorter line length across the entire mast length reduces drag and increases maneuverability. This results in more glide, more efficient pumping, and faster turns. The HM85 covers all disciplines, with a focus on wing foiling. Wind-powered disciplines require edging against the wind to generate propulsion. Part of this propulsion comes from the front wing, another from the mast. To deliver this drive efficiently, the line length in the submerged part of the mast is slightly longer. It increases towards the mast tip to maximize stiffness without increasing drag, as this part of the mast is out of the water when foiling. A more efficient underwater shape means less drag and thus higher and more easily achievable top speeds. Ventilation at the mast is now a thing of the past. We have paid special attention to this detail, so that regardless of sea conditions, ventilation at the rear part of the mast is significantly reduced. The HM105 is optimized for racing. The thickness of the submerged part of the mast is another 1 mm thinner than that of the HM80 and HM85 to achieve maximum top speed. Therefore, this mast is not suitable for jumping. As with the HM85, the line length in the submerged area is designed to provide good lift drive, while the line length above the waterline increases to maximize stiffness. A more efficient underwater shape means less drag and thus higher and more easily achievable top speeds.

SONAR FUSELAGE Foil Accessory The hydrodynamically optimized shape of the Sonar chassis ensures minimal resistance. The chassis is precisely CNC-machined from 6061-T6 aircraft aluminum with an anodized finish and structurally engineered fasteners designed for durability. The shorter A600 chassis enhances pumpability and provides a sporty feel with earlier take-offs. Our longer A700 chassis offers a smoother, more stable ride across all foil disciplines. The forgiving length of 700 mm improves stability in combination with any wing and is ideal for learning to foil. The longer chassis delays the pitch moment, giving you more time to react. Equipped with GeoLock, a unique conical geometry locking connection between the mast and chassis for more efficient load transfer and a more durable connection. Compatible with all Sonar masts.

SONAR SF Surf Front Wing "We have developed our Sonar Surf series for extremely low stall speeds, effortless pumping, and surf-like turns. Ideal for riders who want to get more out of surf and downwind swells (with or without a wing). The foils' insensitivity to angle changes means you don't have to be an expert or have perfect pumping technique. A balanced ratio of roll stability and maneuverability gives you confidence when pumping and taking off, as well as the ability to initiate powerful rail-to-rail turns. Push it harder, stall at the lip, and make tight turns, knowing that peak ventilation is a thing of the past."

SONAR S Surf Stabilizer The Sonar S Surf Stabilizer has a lower stall to complement the SF front wings. Its moderate wingspan creates a sufficiently high aspect ratio for efficient pumping while remaining compact for responsiveness in turns. The minimally curved contour enhances performance at low speeds and effectively reduces the fuselage length compared to curved stabilizers. The wingtips bend upwards to provide directional stability, instilling confidence during takeoff and providing grip in turns. Advanced riders seeking a looser feel can remove the wingtips using the dotted guideline graphic to create a completely flat stabilizer.